Table C-14. Keywords For The Show Annex Command - Bay Networks 6300 Supplement Manual

Chapter 2 Configuration Parameters
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-34
The AppleTalk, tn3270, and IPX parameters are visible only when the
option_key parameter is set to the correct key value.

Table C-14. Keywords for the show annex Command

Keyword Parameters
all Displays all Annex parameters.
generic inet_addr, subnet_mask, pref_load_addr, pref_dump_addr,
load_broadcast, broadcast_addr, load_dump_gateway,
load_dump_sequence, image_name, motd_file, config_file,
authoritative_agent, routed, server_capability,
disabled_modules, tftp_load_dir, tftp_dump_name,
ipencap_type, ip_forward_broadcast, tcp_keepalive,
option_key, session_limit, output_ttl
vcli max_vcli, cli_prompt, vcli_security, vcli_password,
vcli_inactivity
nameserver nameserver_broadcast, max_chap_chall_int, rwhod,
pref_name1_addr, pref_name2_addr, name_server_1,
name_server_2, host_table_size, min_unique_hostnames
security enable_security, security_broadcast, pref_secure1_host,
pref_secure2_host, network_turnaround,
loose_source_route, acp_key, password, allow_snmp_sets,
lock_enable, passwd_limit, chap_auth_name
time time_broadcast, daylight_savings, timezone_minuteswest,
time_server
syslog syslog_mask, syslog_host, syslog_facility, syslog_port
(continued on next page)
Book C