Bay Networks 6300 Supplement Manual page 269

Book A
RA 6300 and Port
Type
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
You cannot specify time ranges without also specifying either a
range of days or a range of dates. A time range with only a
single day or date is not permitted. For example,
time= 9:00am – 5:00pm Sunday is invalid. The correct usage
would be 9:00am – 5:00pm Sunday-Sunday.
• For date1, specify the beginning of a month and day range, e.g.,
January15, February10; for date2 specify the end of a month
and day range. Month specifications observe minimum
uniqueness and are not case sensitive.
The following are examples:
time="9:00am-5:00pm Monday-Friday"
time="9:00-22:00 Sunday"
time="Wed"
time="8:00AM Friday - 6:35PM Friday"
time="10:30 Nov 30 - 21:30 Nov 31"
The time criterion applies to initial access by the user. For instance, in
the first example above, the criterion is met if the user logs in at any time
between 9:00 A.M. and 5:00 P.M. on Monday through Friday of any week
in any month.
The annex and port type criteria let you control security based on the
RA 6300 and RA 6300 port type that the user tries to access. You can use
an asterisk (*) symbol as a wild card in place of an RA 6300 name or the
host port of an RA 6300 IP address. The following are valid annex and
port type specifications:
annex=annex03;ports=asy
ports=syn
annex=192.17.5*
annex=*
Chapter 15 Using RA 6300 Security
A-241