Erpcd - Bay Networks 6300 Supplement Manual

Book C

erpcd

Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
T
his chapter in the Remote Annex Administrator's Guide for UNIX
describes the following utilities:
• aprint.
• erpcd.
• rtelnet.
For the Remote Annex 6300, please note that:
• You should not direct the aprint utility to an RA 6300.
• The rtelnet utility is not applicable to the RA 6300.
• New arguments are available with erpcd; a revised description
follows.
The erpcd, or expedited remote procedure call daemon, responds to all
Annex boot, dump, and ACP security requests. This daemon contains
two programs:
• bfs – the block file server used to access host files and dump
Annex images.
• acp – the Access Control Protocol program for host-based
security requests.
Table C-36 lists the arguments for erpcd. The syntax is:
/etc/erpcd [ [–D[level]] [–c [maxnumber] [–d [udpport][–f [directory]\
[–p][–s [directory] [–u [filename] [–b [max_con] [–x [max_total]\
[–g [period]] [– [l, L]] [– [a, A]] [–n] [– [t, T]] [–v [version]]
Chapter 4
Utilities
C-115