Set - Bay Networks 6300 Supplement Manual

Chapter 1 na Commands
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-20

set

The set command requires superuser privileges.
The set command modifies RA 6300 configuration parameters:
set annex Modifies RA 6300 parameters.
set interface Modifies interface parameters.
set port Modifies global port parameters.
set pri Modifies PRI parameters.
set pri b Modifies the PRI B channel parameters.
The syntax is:
set annex [=annex_list] annex_parameters
set interface [=interface_list] interface_parameters
set port port_parameters
set pri pri_parameters [pri_line_parameters]
set pri b [=channel_range] pri_b_parameters
The annex_parameters, interface_parameters, port_parameters, and
pri_parameters and pri_b_parametersarguments require a name and a
value separated by a space. A space is required between each parameter
argument. You can enter more than one parameter argument with each
command. If you are entering multiple parameter arguments that require
a new line, precede the new line with the ''\'' character. Changes made
to parameters take effect after booting or resetting the RA 6300 or the
port(s).
Book C