Bay Networks 6300 Supplement Manual page 462

Chapter 1 na Commands
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-6
The following example creates an annex_list containing one RA 6300
with the Internet address 132.245.6.40:
command: annex 132.245.6.40
The following example creates an annex_list containing two RA 6300s
(one specified by its IP address, and the other specified by its name):
command: annex 132.245.6.40,frontlobby
The following example shows how na prompts for missing arguments:
command: annex
enter default annex list: 132.245.6.40,frontlobby
The following annex command displays a message identifying the
specified RA 6300, its Internet address, the number of serial lines it has,
and its software version:
command: annex 132.245.6.1
132.245.6.1: Remote Annex 6300 Rx.x
The following annex command causes an RA 6300 to prompt for an
administrative password, provided that the password has been set and
security has been enabled:
command: annex frontlobby
Password for 132.245.6.40 <frontlobby>
frontlobby: Remote Annex 6300 Rx.x
If you use the na command password to define a default password for
this na session, and that password matches the RA 6300
administrative password, no password prompt appears and normal
processing continues (see password on page 1-16).
Book C