Bay Networks 6300 Supplement Manual page 91

Book A
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
The changed value is automatically saved in nonvolatile memory and will
remain set for subsequent PRI calls and across re-boots of the RA 6300.
Currently active calls are not affected.
To configure multiple global port parameters on multiple Remote Annex
6300s:
1. Define the global port parameters.
2. Use the copy port command to copy the parameters to other
RA 6300 sessions.
The following example copies the parameter setting for allow_broadcast
from one RA 6300 to another RA 6300:
command: annex 132.245.6.40
command: set port allow_broadcast N
command: copy port 1@132.245.6.40 1@132.245.6.55
You can also define all parameters, including global port parameters, for
one RA 6300. Use the write command to create a script file on the
specified UNIX host containing all the configuration data for that
RA 6300. Finally, execute the read command for all RA 6300s you want
to configure.
The write command does not write passwords.
For descriptions of the parameters you can set, see Configuration
Parameters on page C-29.
Chapter 3 Configuring the PRI Interface, Global Ports,
A-63