Identifying T640 Fpcs; Figure 28: Fpc Edges; Table 43: Identifying The Fpcs Supported By The T640 Router - Juniper T640 Hardware Manual

Identifying T640 FPCs

Table 43: Identifying the FPCs Supported by the T640 Router

Label on the FPC
FPC Faceplate
Enhanced FPC1
E FPC1
Enhanced II FPC1 E-II FPC1
Enhanced Scaling FPC1
T640-FPC1-ES
FPC2 None
Enhanced FPC2
E FPC2
Enhanced II FPC2
E-II FPC2
Copyright © 2017, Juniper Networks, Inc.
Top edge—Edge at the top of the FPC when it is vertical
Bottom edge—Edge at the bottom of the FPC when it is vertical

Figure 28: FPC Edges

Check the label on the faceplate to identify the FPC. For FPCs without a label on the
faceplate, check the location of a PIC's offline button and how the PIC is secured to the
FPC. See Table 43 on page
Chapter 6: Line Card Components and Description
69.
Location of PIC Offline Button
Slightly beneath the faceplate of the
PIC
Slightly beneath the faceplate of the
PIC
Slightly beneath the faceplate of the
PIC
Inside an opening directly on the
faceplate of each PIC
Inside an opening directly on the
faceplate of each PIC
Inside an opening directly on the
faceplate of each PIC
Method of Securing the
PIC to the FPC
Two captive screws
Two captive screws
Two captive screws
Two captive screws
Two captive screws
Two captive screws
69