Removing A Power Supply From An Acx5000 Router; Figure 48: Installing Power Supply In An Acx5048; Figure 49: Installing Power Supply In An Acx5096 - Juniper ACX5048 Manual

ACX5048 and ACX5096 Universal Access Router
Related
Documentation

Removing a Power Supply from an ACX5000 Router

138

Figure 48: Installing Power Supply in an ACX5048

Figure 49: Installing Power Supply in an ACX5096

NOTE: Each power supply must be connected to a dedicated power source
outlet.
NOTE: If you have a Juniper J-Care service contract, register any addition,
change, or upgrade of hardware components at
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
Failure to do so can result in significant delays if you need replacement parts.
This note does not apply if you replace components with the same type of
component.
AC Power Supply for an ACX5000 Router on page 37
DC Power Supply for an ACX5000 Router on page 39
Connecting AC Power to an ACX5000 Router on page 114
Connecting DC Power to an ACX5000 Router on page 116
Removing a Power Supply from an ACX5000 Router on page 138
The power supplies in an ACX5000 router are hot-removable and hot-insertable
field-replaceable units (FRUs): you can remove and replace them without powering off
the router or disrupting routing functions.
Copyright © 2015, Juniper Networks, Inc.
.