Controller; Figure 2-46 System Settings - Controller Ip; Figure 2-47 System Settings - Obtain Controller Ip; Controller Ip - Delta DTV Series User Manual

2.8.2

Controller IP

Tap to switch to the Controller IP screen, where you can obtain the current controller IP or
set the controller IP, as shown in Figure 2-46.
Follow this step to obtain the current controller IP:
1. Connect the teach pendant to the controller to automatically read the IP address, subnet mask, and
default gateway of the current controller. The IP obtained is displayed in the IP field, as shown in
Figure 2-47.
Follow these steps to set the controller IP:
1. Tap .
2. The last number in the IP field can be changed by the user, as shown in Figure 2-48.
3. Tap to write the IP to the controller and the
the button returns to
4. You can use the DRAStudio software to check whether the current IP setting is correct.
.

Figure 2-46 System settings - Controller IP

Figure 2-47 System settings - obtain controller IP

2. Tab Operation and Function Instructions
button changes to
56
. When complete,