Analyzer Options Available; Option Ld5, High Stability F'requency Reference; Optionoo7,Mechanicaltransferswitch; Option 089, Frequency Offset Mode - Agilent Technologies HP 8719D Service Manual

Analyzer Options Available

Option lD6, High Stability Frequency Reference
Option lD5 offers f0.05 ppm temperature stability from 0 to 56 OC (referenced
to 25 "C).
Option 007, Mechanical Transfer Switch
This option replaces the solid state transfer switch with a mechanical switch in
the test set, providing the instrument with greater power handling capability.
Because the mechanical transfer switch has less loss than the standard switch,
the output power of Option 007 instruments is 5 dB higher.
Option 086, High Power System
This option is designed to permit the measurement of high power devices
With an external power amplifier, this ConGguration will allow up to 20 Watts
1 Watt (+ 30 dBm) CW, but jumpers on the front panel allow the insertion of
high power attenuators or isolators This allows test device output levels up to
the power limits of the inserted components Additionally, there is an external
reference input that allows the external ampliiler's frequency response and
drift to be ratioed out, and there are internally controlled step attenuators
between the couplers and samplers to prevent overload. A network analyzer
with this option can be configured to operate as a normal instrument (with
slightly degraded output power level and accuracy) or as an instrument capable
of making single connection multiple measurements Because of high output
power, option 085 is only available with a mechanical transfer switch similar to
Option 007.

Option 089, Frequency offset Mode

This option adds the ability to offset the source and receiver frequencies for
frequency translated measurements 'I'his provides the instrument with mixer
measurement capability. It also provides a graphical setup that allows easy