Eeprom Backup Disk Procedure - Agilent Technologies HP 8719D Service Manual

EEPROM Backup Disk Procedure

Floppy Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP 92192A (box of 10)
The correction constants, that are unique to your instrument, are stored in
EEPROM on the A7 controller assembly. By creating an EEPROM backup disk,
you will have a copy of all the correction constant data should you need to
replace or repair the A7 assembly.
1. Insert a 3.5~inch disk into the analyzer disk drive.
2.
If the disk is not formatted, follow these steps:
b. Select the format type:
lb format a ID disk, select
n
lb format a DOS disk, select
n
Note
The analyzer creates a default file TILEO". The iilename
appears in the upper-left comer of the display. The file type
EEPROM backup.
the flle "FlLEO" To "N12305" where Xi?%5 represents the last 5 digits of the
instrument's serial number. (!l'he Wst character in the Wename must be a
letter.) When you are finished renaming the llle, press
336 and Correction Constants
.
Use the front panel
keyboard) to rename