Agilent Technologies HP 8719D Service Manual page 295

activity, look at this node on an oscilloscope, using
PEEK/POKE Menu
To access this menu, press CSYSTEM) %WIcE; ?fEW FEEIC&l1(11..
Caution
The PEEK/POKE capability is intended for service use only.
1 O-36 Service Key Menus and Error Messages
Allows you to edit the content of one or more
memory addresses. The keys are described below.
accesses any memory address and shows it in the
active entry area of the display. Use the front panel
knob, entry keys, or step keys to enter the memory
address of interest.
Displays the data at the accessed memory address.
allows you to change the. data at the memory
address accessed by the l?#&/ITW .&X%EZ$
step keys to change the data. The A7CC jumper
must be in the "AI.2" position in order to poke.
Resets or clears the memory where instrument
states are stored. lb do this, press I&S'T i!IEX#~
(PRESET).
. . . . . i . , . . . .