If the interface on your printer is HP-US, verify that the printer address is
n
set to 1 (or change the setting in the analyzer to match the printer).
If the interface on your printer is serial or parallel, be sure that you
n
selected the printer port and the printer type correctly (refer to the
HP 8719DBODL?ZD Network Analyzer User's Guide
on how to perform these tasks).
8.
Press fZ7J
used.
9.
Press (jj)
10.
analyzer displays
is complete
another instrument state. You must use the instrument state
that you loaded during the initialization procedure for the next
and select the type of calibration kit
Sys Ver Init DONE
for more information
when the initialization procedure
System Veriiication and