Table of Contents
Advertisement
Rebuilt-Exchange Assemblies
Under the rebuilt-exchange assembly program, certain factory-repaired
and tested modules (assemblies) are available on a trade-m basis. These
assemblies are offered for lower cost than a new assembly, but meet all factory
specifications required of a new assembly.
The defective assembly must be returned for credit under the terms of the
rebuilt-exchange assembly program. Any spare assembly stock desired should be
ordered using the new assembly part number. Figure 13-1 illustrates the module
exchange procedure. "Major Assemblies, Top" and "Major Assemblies, Bottom"
list all major assemblies, including those that can be replaced on an exchange
basis.
Ordering Information
To order a part listed in the replaceable parts lists, quote the Hewlett-Packard
part number, indicate the quantity required, and address the order to the
nearest Hewlett-Packard office. The Hewlett-Packard Sales and Service Offices
table is located in Chapter 15.
To order a part that is not listed in the replaceable parts lists, include the
instrument model number, complete instrument serial number, the description
and function of the part, and the number of parts required. Address the order
to the nearest Hewlett-Packard office.
Advertisement
Table of Contents
Troubleshooting
