Agilent Technologies HP 8719D Service Manual page 181

NOTE:
Check for a Faulty Assembly
This procedure checks for a faulty assembly that might be shutting down the
n
the +SVCPU Iine through the motherboard
n
the +SVDIG Iine through the motherboard
n
Do the foIIowing:
1. Mtch off the anaIyzer.
2. Ensure that AlSWl is reconnected to A8. (Refer to Figure 5-5.)
3. Remove or disconnect the assemblies iisted in 'lkble 5-3 one at a time and in
the order shown. The assemblies are sorted from most to least accessible.
Table 5-3 also Iists any associated assemblies that receive power from