Loading Firmware - Agilent Technologies HP 8719D Service Manual

Loading Firmware

Required Equipment and lbols
n
Analyzer warmup l%w:
The following procedures will load firmware for new or existing CPU boards in
an HP 8719DE?OD/22D network analyzer having firmware revision 7.xx or above.
Loading Firmware into an Existing CPU
Use this procedure for upgrading llrmware in an operational instrument whose
CPU board has not been changed.
1. !l'urn off the network analyzer.
2. Insert the firmware disk into the instrument's disk drive.
3. Turn the instrument on. The llrmware will be loaded automatically duriug
power-on. The front panel LEDs should step through a sequence as firmware
is loaded. The display will be blank during this time.
At the end of a successful loading, the LEDs for Channel 1 and 'I&port 1
that was loaded.
None required.
and Correction Constants 339
Adjustments