Agilent Technologies HP 8719D Service Manual page 424

n
n
ESD (electrostatic discharge) grounding wrist strap
n
Removal
1. Disconnect the power cord and remove the front panel (refer to "Front Panel
Assembly" in this chapter).
2. Disconnect the two ribbon cables (item 1) and (item 2).
3. Remove the two screws (item 3) that attach the GSP to the front of the
analyzer.
4.
Pull the GSP board out of the analyzer.
Replacement
1. Reverse the order of the removal procedure.
14-28 Assembly Rephcement and Poet-Repair Procedures