Agilent Technologies HP 8719D Service Manual page 267

Edit List Menu
To access this menu, press &&G] &ZRKHX HR?$U
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 O-8 Service Key Menus and Error Messages
accesses the power loss/sensor lists menu:
calibration factor list for use in power meter
calibration measurements.
the Edit List menu to allow modification of the
calibration data table for power sensor A.
the Edit List menu to aIlow modification of the
calibration data table for power sensor B.
menu to allow modification of the external power
loss data table that corrects coupled-arm power
loss when a directional coupler samples the RF
output.
generates printed graphs of verification results when
activated during a system verification.
. .
selects a segment (frequency point) to be edited,
deleted from, or added to the current data table.
Works with the entry controls.
allows modification of frequency, caI factor and loss
values previously entered in the current data table.
deletes frequency, caI factor and loss values
previously entered in the current data table.
adds new frequency, cal factor and loss values to the
current data table up to a maximum of 12 segments
(frequency points, PTS).
deletes the entire current data table (or list) when
returns to the previous menu.