10. Press@(iZiJ~[Stopl)~(ZJJ.
11. Pressm
12. If the analyzer is not phase locked, adjust Low Band Power Adjust, A59 R4,
clockwise until the instrument phaselocks across the frequency range 50
14. Adjust the low band power resistor (A59 R4) for a power meter reading that
is equal to the value listed under "Power A" in lhble 3-4.
Model/Option
HP 8719/2OD'
HP 8719/2OD Option 007
HP 8722D1
HP 8722D Option 007
Note
The analyzer may display the message CAUTIOIU TEST PORT
OVERLOAD, REDUCE POWER. Ignore this message and continue
with the procedure.
15. Press=
Adjust Mid Band Power
18. 'lb switch the power DAC on, press the following keys:
3-24
Adjustments and Correction Constants
Power A (dBm)
Power B (dBm) 1 Power C (dBm)
-3
-3
-5
I