Agilent Technologies HP 8719D Service Manual page 155

Verify Internal Xksts Passed
TEST
0 ALL INT
with this step.
or failing. In this case, continue with the next procedure to check the
If you have unexpected results, or if the analyzer indicates a specific test
q
reports the first failure detected.
If the analyzer indicates failure but does not identify the test, press &)
q
to search for the failed test. Then refer to Chapter 6, "Digital Control
Troubleshooting." Likewise, if the response to front panel or HP-IB
commands is unexpected, troubleshoot the digital control group.
If this test faiIs, refer to Chapter 6, "Digital Control Troubleshooting."
q
If this test passes, continue with the next procedure to check the source.
q
. . .../ c.-. .._.....__... , , , , _ , , , ,
The display should indicate:
PASS
to perform the Analog Bus test.