Step 1. Initiai Observations; Initiate The Anaiyzer Self-Test - Agilent Technologies HP 8719D Service Manual

Step 1. Initial Observations
Initiate the Analyzer Self-!lkst
1. Disconnect ail devices and peripherals from the analyzer.
2.
Switch on the anaQzer and press (w)
3.
Watch for the indications shown in F'igure 41 or Figure 42 to determine if
the analyzer is operating correctly.
MESSAGES APPEAR IN SEOVENCE:
SELF TEST PASSED1
PARAMETERS APPEAR AFTER PRESET:
. S T A R T 0 . 0 5 GHr. S T O P 2 0 . 0 GHz (HP8720D)
AFTER PRESET
ILLUMINATES ==4 SECONDS
ILLUMINATES
AFTER PRESET
Start Troublesbooting Hen