Unprotected Hardware Option Numbers Correction Constants - Agilent Technologies HP 8719D Service Manual

Unprotected Hardware Option Numbers
Correction Constants
This procedure stores the instrument's unprotected option(s) information in A7
CPU assembly EEPROMs
1. Make sure the A7 jumper/switch is in the Alter position (AW).
2. Record the installed options that are printed on the rear panel of the
analyzer.
4. Refer to 'hble 3-2 for the address of each unprotected hardware option.
Enter the address for the speciiic installed bar
enabled or disabled. Follow the address entry by
Pressing
n
n Pressing
PEEK/POKE Addresses for Unprotected EIar&are Options
5. Repeat steps 3 and 4 for all of the unprotected options that you want to
enable
8722
6243260
007
089
400
012
and Above
1619001533
Adjustments
and Commotion Constants 3-19