Agilent Technologies HP 8719D Service Manual page 400

Line Fuse
small slot screwdriver
n
Removal
Warning
For continued protection against tie hazard, replace fuse
only with same type and rating (3 A 250 V F). The use of
other fuses or materials is prohibited.
1. Disconnect the power cord.
2. Use a small slot screwdriver to pry open the fuse holder.
3. Replace the blown fuse with a 3 A 250 V F fuse (HP part number 2110-0708).
Replacement
1. Replace the fuse holder.
1 4 4 Assembly Replacement and Post-Repair Procedures