Table of Contents
Advertisement
Exterior Rear View
The pod attaches to the robot base and holds three racks. The pod
locks onto the robot base to prevent the racks from moving out of
position relative to the robot.
One pod contains the power entry port and the power connections
to the robot. Each Twister II robot must have exactly one pod with
the power entry port.
Part
Pod Securing
Location
Cable Location
Power Entry
Port/Fuse
Assembly
P/N 113564 Rev. 2
Pod
Power Entry
Port/Fuse
Assembly
Figure 75. Pod with Power Entry Port
Function
Location where the securing assembly locks
the pod to the robot base.
Location of the power supply and
communication cables that connect to the
robot.
The communication port, power port, and fuse
block. See
on page 98
NOTE
There is only one power entry port for the
Twister II, regardless of the number of pods.
Twister II Robot User's Manual
Twister II Hardware
Pod
Securing
Location
Cable
Location
"Twister II Power/Fuse Assembly"
for details.
Caliper Life Sciences, Inc.
95
Advertisement
Table of Contents
