Add Position Window; New Path Window - Caliper Life Sciences Twister II User Manual

Add Position Window

Use the Add Position window to add a new position to the
instrument selected in the Names tab. The new position is created
from the current position of the robot. Move the robot to the desired
position before you click the New button. To open the Add Position
window, click the New button on the Positions tab on the Teach tab.
Name - The name of the new position.
Type - The position type, either Absolute or Relative. For more
information, see
OK - Saves the new position with the specified name and closes the
Add Position window.
Cancel - Closes the window without creating a new position.

New Path Window

Use the New Path window to create a new path for the instrument
selected in the Names tab. The path does not include any positions
when it is created. Use the New Position button on the Paths tab
(see
Path Name text box - The name of the path to create.
OK - Creates the new path and adds it to the Paths list.
Cancel - Closes the New Path window without creating a new path.
P/N 113564 Rev. 2
Figure 105. Add Position Window
page 19.
page 126) to create the positions.
Figure 106. New Path Window
Twister II Robot User's Manual
Appendix A: Software Reference 133
Caliper Life Sciences, Inc.