Table of Contents
Advertisement
Rack Parts and Functions
Racks are removable aluminum frames used as input and output
locations for the materials. The standard Twister II includes three
racks. Each rack has two side handles and one top handle to
facilitate removal and transport.
You teach the rack positions using the Twister II Robot software.
The racks are interchangeable, but each rack is marked with the
pod position, and you may need to re-teach the rack position if
racks are changed.
NOTES
Do not drop the racks. If the rack is out of shape, the robot will not
properly place the materials.
Part
Rack Locator
Notch
Side Handles (2)
Top Handle
P/N 113564 Rev. 2
Handles
Rack Locator
Notch
Figure 82. Storage Rack
Function
Locks the racks onto the pod in the proper
position.
Fixed handles for connecting or disconnecting
racks from the pod.
Hinged handle for connecting or disconnecting
racks from the pod.
Twister II Robot User's Manual
Twister II Hardware 102
Caliper Life Sciences, Inc.
Advertisement
Table of Contents
