Table of Contents
Advertisement
Setting up a Storage Configuration (Continued)
6
7
8
NOTES
•
•
P/N 113564 Rev. 2
The Choose CLARA Application window opens (see
and displays the applications that have been created in CLARA.
Do not create a storage configuration for Restack applications.
See the CLARA User's Manual for instructions on creating
applications to restack the materials after a method.
Figure 7. Choose CLARA Application Window
Select the application you want to configure.
Select how you want to group the materials, either by Name or
by Type (see below and on
When using multiple source racks, you must fill the first source
rack before using the next source rack.
Each plate type must have its own source and destination racks.
a
Name - Group materials by name if you want to stack the
materials based on the name of the material in your CLARA
application. The Stack Storage software places all the
materials of one name together, adding an empty "output"
rack between material groups.
Example:
'Material1' is a Polystyrene, 96microplate, flat bottom plate.
'Material2' is a Polystyrene, 96microplate, flat bottom plate.
Grouping by name creates a configuration with all Material1
grouped together and all Material2 grouped together; i.e.,
each material name is assigned to a different rack.
Twister II Robot User's Manual
page 32
for details and examples).
Caliper Life Sciences, Inc.
Operation
31
Figure
7)
Advertisement
Table of Contents
