Capacity Planning Window - Caliper Life Sciences Twister II User Manual

Capacity Planning Window

The Capacity Planning window (see
gathered from the selected CLARA application.
Field
Racks
Instrument
Name
Maximum
Capacity
P/N 113564 Rev. 2
Figure 141. Capacity Planning Window
Description
The number of racks in the system. Click in the
Racks column to edit the number of racks. Enter the
exact number of racks in the system so the
configuration process can verify the capacity.
Options:
• 1 - 3
• 1 - 6
• 1 - 9
• 1 - 12
The Twister II storage instrument's resource name in
CLARA. Non-editable.
A user-defined number that represents the maximum
capacity of one rack, for the Material Type listed.
Click in the Maximum Capacity column to edit the
value. You must edit or verify the default value
that is provided. (For information on determining
the maximum capacity of a rack, see
Storage Configuration" on page
Lids: When using plates with lids, count the number
of plates plus the number of lids. The total stack of
materials MUST be below the top of the rack.
For Example: MaterialA, MaterialAwithlids. The lid
must be the same material type as the material.
Twister II Robot User's Manual
Appendix A: Software Reference 162
Figure 141) displays the data
"Setting up a
29.)
Caliper Life Sciences, Inc.