Caliper Life Sciences Twister II User Manual page 107

Changing the Twister II Fuse(s) (Continued)
6
7
8
P/N 113564 Rev. 2
c Remove the 3Amp fuse.
d Turn the fuse block over and replace with the two fuse
locations facing up, as shown in
e Tighten the screw to secure the fuse block to the cover.
f Place the two 1.6Amp fuses for 240V configuration into the
fuse block as shown in
Replace the fuses with the same part number fuses.
Confirm that the fuses are seated securely in the fuse block.
Snap the fuse block/cover assembly back into the housing. See
Figure 83 on page 105.
Twister II Robot User's Manual
Twister II - Maintenance 107
Figure 85.
Figure 85.
Caliper Life Sciences, Inc.