Settings Window - Caliper Life Sciences Twister II User Manual

Settings Window

Use the Settings window (see
setting and the Comm port. To open the Settings window, select
File→Settings on the Robot software main window.
The settings option opens the Settings window.
Simulation Mode - If On, communication with the robot is
simulated and the robot does not move. If Off, enables
communication with the robot using the specified Comm port.
Comm Port - The number of the Comm port that the robot is
connected to on the computer.
Option
Apply
Cancel
P/N 113564 Rev. 2
Figure 109. Settings Window
Description
Applies the specified settings and closes the
Settings window. To save the settings in the INI
file, select File→Save on the Robot software main
window.
Closes the Settings window without changing the
settings.
Twister II Robot User's Manual
Appendix A: Software Reference 136
Figure 109) to specify the simulation
Caliper Life Sciences, Inc.