Table of Contents
Advertisement
Opening the Correct INI File
When operating the robot in Standalone mode, you must manually
open the robot INI file that contains the correct settings and
positions for the robot.
To open the desired INI file:
1
2
3
P/N 113564 Rev. 2
In the Robot software, select File→Open to open the Open
window (see
Figure
Figure 25. Open Window
Select the desired project (INI) file. (Select the INI file with the
correct Comm port setting and positions and paths that were
taught for the system.)
Click the Open button to open the project file and display the
robot settings, positions, and paths.
Twister II Robot User's Manual
Moving the Robot Manually
25).
Caliper Life Sciences, Inc.
51
Advertisement
Table of Contents
