Open Configuration Window - Caliper Life Sciences Twister II User Manual

Field
Source/
Destination
Tip Base
Height
OK
Cancel

Open Configuration Window

The Open Configuration window (see
CLARA applications that have had material configurations created.
Configuration List - Displays all of the material configurations that
have been created for CLARA applications.
Field
OK
Cancel
P/N 113564 Rev. 2
Description
The type of rack: Source or Destination.
• Source - A rack that the robot is taking materials
from.
• Destination - A rack that the robot is moving
materials to.
The rack type is determined by the CLARA
application.
The height of the tip box base in millimeters, as
specified in the Capacity Planning window.
Closes and saves the configuration.
Closes the New Stack Storage Configuration
window without saving the configuration.
Figure 144. Open Configuration Window
Description
Opens the selected material configuration. The
configuration displays in the Stack Storage
Configuration window (see
Closes the Open Configuration window without
opening a material configuration.
Twister II Robot User's Manual
Appendix A: Software Reference 165
Figure 144) displays all
page 166).
Caliper Life Sciences, Inc.