Caliper Life Sciences Twister II User Manual page 101

Component
Power Cable Port
Fuse Cover
Power Switch
P/N 113564 Rev. 2
Description
Connector for the power cable.
WARNING
Appliance inlet is disconnecting device. Place
device or equipment in a manner so that
disconnecting device is accessible all the time.
The fuse housing assembly. The fuse
configuration is the same for either 100/120V or
240V. You do not have to change the fuse
configuration. See
Twister II Fuses" on page 108
change the fuses.
Rocker switch labeled 1/0. When the switch is
on (1), the LED power light turns on.
Make sure the Assay Engine Twister II is
positioned to allow access to the power switch
to easily disconnect or turn off/on the unit.
Twister II Robot User's Manual
Twister II Hardware 101
"Changing the Assay Engine
if you need to
Caliper Life Sciences, Inc.