Table of Contents
Advertisement
Error Message
If the following error message displays, the software is unable to
establish communication with the robot.
Verify that all hardware connections described in the robot
installation instructions are correctly installed, and the appropriate
simulation mode and Comm port are set in the Settings window.
Customize the User Interface
If desired, you can customize the tool bars in the Robot software.
Use the down-arrow icons on the tool bars to access the Customize
Tool bars menu. See the Windows Help file for instructions on
customizing tool bars.
P/N 113564 Rev. 2
Figure 4. Initialization Error Window
Twister II Robot User's Manual
Operation
Caliper Life Sciences, Inc.
28
Advertisement
Table of Contents
