Table of Contents
Advertisement
Status Bar
The Status bar displays the current status of the robot.
Field
Simulation
Mode
Operation
Status
Software
Control Status
Software
Name and
Revision
P/N 113564 Rev. 2
Figure 92. Status Bar
Description
Displays the simulation mode for the open robot
project. Displays Simulation Mode if simulation
is on, or the COM port number if simulation is
off.
Current status of the robot:
• Idle - Not in operation, no errors.
• Homed - The robot is at the Home position.
• Busy - Waiting for hardware response,
command pending.
• Aborted - The last robot command was
stopped.
• Error - A hardware error occurred while
executing the last command.
The current Software Control Status, either
Standalone or Remote (see
information).
Software name and revision number.
Twister II Robot User's Manual
Appendix A: Software Reference 120
page 22
Caliper Life Sciences, Inc.
for more
Advertisement
Table of Contents
