Table of Contents
Advertisement
Instrument Teach Wizard - Position Number Window
Use the Position Number window to specify the position number
that you want to teach. The position number can be different from
the location number. For example, if you are teaching the Sciclone,
you may want location 1 to be taught as position 4, location 2 =
position 5, location 3 = position 9, location 4 = position 10, and
location 5 = position 20 (depending on which Sciclone positions the
robot can access). Then in the automation control software, you
would set up a Move to Sciclone position 5.
Figure 127. Instrument Teach Wizard, Position Number Window
P/N 113564 Rev. 2
Twister II Robot User's Manual
Appendix A: Software Reference 150
Caliper Life Sciences, Inc.
Advertisement
Table of Contents
