Caliper Life Sciences Twister II User Manual page 36

Adding Materials to the Twister II Racks in iLink PRO
(Continued)
To add materials to the Twister II racks:
1
2
3
4
5
6
P/N 113564 Rev. 2
Click the desired consumable icon and drag it to the desired
rack.
When you drop the material onto a rack location, the Material
Name window opens as shown in
Figure 13. Material Name Window
In the Name text box, type a name for the material. Note that
when adding multiple materials to the same Twister II storage
rack, the material s are sorted alphabetically, with the name
closest to Z appearing at the top of the stack. To add materials
correctly, you must add materials alphabetically, starting with
the name closest to A.
Click the OK button to add the material to the rack.
If the same material is located in more than one rack at the
beginning of the method, click on the material in the rack and
drag the material to the next rack.
Figure 14. Multiple Racks for One Material
If the method moves the plates to an empty Twister II rack
during the method, you must define an output rack:
a Drag the material from the last input rack to the output rack.
b Drag the Make Output icon onto the output rack as shown in
Figure 15.
Twister II Robot User's Manual
Figure 13.
Drag and Drop to Rack 2
Caliper Life Sciences, Inc.
Operation 36