Example: Adding Multiple Materials to Twister II Racks
This example demonstrates how to add three plates with different
names to the same Twister II racks. The plate names will be Mother,
Daughter, and Destination. All three plates must be the same plate
type.
The plates MUST be added in alphabetical order as follows:
1
2
3
If the plates are not added in alphabetical order, the initial material
setup will not be correct.
To add the materials:
1
2
3
P/N 113564 Rev. 2
Daughter
Destination
Mother
Drag the desired material for Daughter to Storage Rack 1. The
Material Name window opens.
Figure 16. Material Name Window
Type Daughter in the text box and click the OK button.
Drag the Daughter plate from rack 1 to rack 2.
Twister II Robot User's Manual
Drag and Drop to Rack 2
Caliper Life Sciences, Inc.
Operation
38