Adjusting Headlights
The basic adjustment of the headlights can only
be performed on a special
machine.
It should be
carried out with the vehicle in ready-to-drive con-
dition and with the fuel tank full. The driver's
seat must be occupied by a person or a 75 kg
weight,
and the tyres must be inflated to the
specified
pressures.
With the vehicle in this con-
dition, it should then be rolled a few metres to
allow the suspension springs to settle.
The headlight beam adjustment must be in posi-
tion
"0".
Adjusting Screws
The main and auxiliary headlights each have two
adjusting screws
(arrows).
By turning the screws
clockwise or anticlockwise, the adjustment is
varied accordingly.
101