66 78 01 Checking function of heating for mirror glass
Note
Check with the temperature probe
Note
•
The function of the heating for the mirror glass can be checked with a temperature probe with digital
display (see Workshop Equipment Manual)!
•
The indicator light in the rocker switch also lights up if a fault is present and the heating wires in the
mirror glass do not warm up!
top of page
Check with the temperature probe
The tip of the sensor is used to measure from the outside on the centre of the mirror glass.
Note
•
After switching on at room temperature and a period of 1 minute, the temperature must increase by
approx. 2 degrees!
•
If no temperature increase is shown, the fault must be detected on the basis of the wiring diagram!
996420, 996421, 996450, 996451, 996840, 996841, 996430, 996431
66 78 01 Checking function of heating for mirror glass
982