Comtech EF Data CDM-710 Installation And Operation Manual page 328

CDM-710/L Broadcast Satellite Modem
Appendix D
Once the CReflash.exe application starts, the program will not
respond to user input for approximately 5 minutes. During this
time, a message displays on the modem front panel VFD to
indicate this progress phase.
• DO NOT CLOSE THE CR
• DO NOT REBOOT THE MODEM!
5. When done, click [Cancel] to exit CReflash.
6. Reboot the CDM-710. The new GBEI firmware will load upon power-up of
the unit.
7. Verify that the new firmware load is active upon reboot:
• From the CDM-710 front panel:
SELECT: UTIL Firmware Info Image# (Image1 or Image2)
InterfacesGBEI
• From the Serial Console port: To view the GBEI information, select
Operations, and then select Maintenance/Unit Information.
• From Telnet via the CDM-710 'J4 | Ethernet' 10/100 M&C port: To
view the GBEI information, select Operations, and then select
Maintenance/Unit Information.
• From the CDM-710 HTTP (Web Server) Interface via the CDM-710 'J4
| Ethernet' 10/100 M&C port: To view the GBEI information, select
the Maint navigation tab, and then select the Unit Info hyperlink.
.EXE PROGRAM ON THE PC!
EFLASH
D–12
MN/CDM710.IOM
Revision 12