Comtech EF Data CDM-710 Installation And Operation Manual page 148

CDM-710/L Broadcast Satellite Modem
Front Panel Operation
(CONFIG:) Intfc2 Gigabit Ethernet:  Egress
Use the   arrow keys to select Ena/Dis, FEC, or IP. Press ENTER.
(CONFIG:) Intfc2 Gigabit Ethernet:  Egress  Ena/Dis
Use the   arrow keys to select Enable or Disable. Press ENTER. Select Enable
to allow reception of the IP-encapsulated MPEG packets to the LAN. Select
Disable to turn off the egress packets to the LAN.
(CONFIG:) Intfc2 Gigabit Ethernet:  Egress  FEC
This menu allows enabling and configuration of the SMPTE 2022/Pro-MPEG
COP3 FEC stream to the LAN. Use the   arrow keys to select Enable, Disable,
or Matrix. Press ENTER.
(CONFIG:) Intfc2 Gigabit Ethernet:  Egress  FEC  Ena/Dis
Use the   arrow keys to select Enable or Disable. Press ENTER. Select Enable
to generate SMPTE 2022/Pro-MPEG COP3 FEC IP packets to the LAN, in addition
to the stream of IP-encapsulated MPEG packets. Select Disable to run off the
generation of FEC packets to the LAN.
Intfc2 Gigabit Egress:
Ena/Dis FEC IP
Intfc2 Egress Enable:
Enable Disable
Intfc2 FEC
Ena/Dis Matrix
Intfc2 Egress FEC:
Enable Disable
7–42
MN/CDM710.IOM
Revision 12
(E)
(E)