CDM-710/L Broadcast Satellite Modem
Front Panel Operation
(Config:) Remote Control: Ethernet MAC
This screen displays a read-only status message. Press ENTER or CLEAR to return to
the previous menu.
This example is representative of a typical MAC Address.
(Config:) Remote Control: Ethernet SNMP
Use the arrow keys to select Community or Traps. Press ENTER.
(Config:) Remote Control: Ethernet SNMP Community
Use the arrow keys to select Read or Write. Press ENTER.
(Config:) Remote Control: EthernetSNMPCommunityRead
Edit the SNMP Read Community string. Use the arrow keys to select a
character. Then, use the arrow keys to change that character. All printable
ASCII characters are available, except for the backslash (ASCII code 92) and tilde
~ (ASCII code 126).
Press ENTER after you compose the string. The unit removes all trailing spaces
from the string upon entry.
M&C Port MAC Address:
00-06-B0-00-56-33
SNMP:
Community Traps (LRE)
SNMP:
Read Write
Read Community:
public
7–12
MN/CDM710.IOM
(E)
Revision 12