Comtech EF Data CDM-710 Installation And Operation Manual page 252

CDM-710/L Broadcast Satellite Modem
Serial Interface Operation
Controller-to-Target
Instruction Code & Qualifier
Parameter
Type
Command Query
Transmit &
Receive
Configuration
(continued)
Number of
Arguments for
Command or
(Note that all arguments are ASCII numeric codes from 48 and 57)
Response to
Query
NOTES:
1) ** = Read-only.
2) Unit returns 'x's for Rx parameters if unit is Modulator only.
3) Unit returns 'x's for Tx parameters if unit is Demodulator only.
4) If Rx is in DVB-S2 mode, the Rx Modulation Type (RMD) and Rx FEC Rate
(RCR) are ignored because they are automatically detected.
9–44
Description of Arguments
MN/CDM710.IOM
Revision 12
Target-to-Controller
(See Description of Arguments)
Response to Response to
Command Query