Use Windows Desktop To View Folder Contents; Use Windows Command-Line To View Folder Contents - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710/L Broadcast Satellite Modem
Firmware Update
• ReleaseNotes_CDM710B_X_X_X.pdf (firmware release notes).
• ftp_upgrade.pdf (firmware update procedure notes).
9. Confirm availability of the firmware files in the temporary folder. There are
several ways you can view the contents of the temporary folder on a
Windows-based PC:
• To use the Windows Desktop, see Section 5.2.5.1.
• To use Windows Command-line or Command Prompt, see Section
5.2.5.2.
• After you confirm the firmware files are in the folder, proceed to
Section 5.3 to upload the firmware update to the modem.

5.2.6.1 Use Windows Desktop to View Folder Contents

From the Windows Desktop:
1. Double-left-click the Windows Explorer icon, and then double-left-click as
needed to locate, and then open, the "temp" folder (directory) created
earlier on the Windows Desktop.
2. Use the Browse window (Start > ...Run > Browse) to locate, and then double-
click to open, the "temp" folder.

5.2.6.2 Use Windows Command-line to View Folder Contents

Using Command-line or Command Prompt:
1. Type "cd c:\temp" at the Windows Command-line prompt to change to the
temporary folder (directory) created earlier using Command-line.
2. Type "dir" to list the files extracted to the temporary folder from the
downloaded archive file.
5–12
MN/CDM710.IOM
Revision 12