CDM-710/L Broadcast Satellite Modem
Ethernet Interface Operation
2. For ASCII Setup (File Properties Settings ASCII Setup) (Figure
8-3, right):
a. Check the "Send line ends with line feeds" option in the 'ASCII
Sending' section.
b. Check the "Append line feeds to incoming line ends" option in
the 'ASCII Receiving' section.
c. Click [OK] to save your settings.
8.4 HTTP (Web Server) Interface
A user-supplied web browser allows the full monitoring and control (M&C) of the
CDM-710/L from its HTTP Interface. This non-secure embedded web application
is designed for, and works best with, Microsoft Internet Explorer Version 7.0 or
higher.
8.4.1 HTTP Interface User Login
You must use CDM-710/L Front Panel operation to select "Ethernet"
as your mode of operation prior to login. Failure to configure the
CDM-710/L accordingly will cause the Login dialogue box to return
you to a blank web page.
Do these steps:
1. From the PC, enter the default Management IP Address for the unit (i.e.,
http://192.168.1.4) into the Address area of the browser.
You may obtain your assigned address from the CDM-710/L front
panel menu: SELECT: CONFIG
Chapter 7. FRONT PANEL OPERATION for further details. You may
also need to consult with your network administrator to determine
the appropriate IP address assignment for your modem.
Remote
Ethernet
8–9
MN/CDM710.IOM
Revision 12
Address. See