Use The Serial Interface To Find The Firmware Information; Use The Http Interface To Find The Firmware Information - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710/L Broadcast Satellite Modem
Firmware Update

5.2.3.3 Use the Serial Interface to Find the Firmware Information

Use your terminal emulator to execute remote queries with the modem. Use
either of these remote queries to find the firmware information:
• Condensed : <0/SWR?{CR}
(returns the firmware version numbers running under Boot, Bulk1, and
Bulk2, in the form B.B.BB)
• Detailed : <0/FRW?{CR}
(returns the complete information of the firmwares running under Boot,
Bulk1, and Bulk2 in the form similar to FW-AAAAAAA B.B.BB DD/MM/YY,
where:
o FW-AAAAAAA = the firmware part number
o B.B.BB = the firmware version number
o DD/MM/YY = the firmware release date (Day/Month/Year)

5.2.3.4 Use the HTTP Interface to Find the Firmware Information

Do these steps:
1. The 'Firmware Information' section of the 'Maint | Unit Info' page provides
the firmware details as Boot, Active Bulk, and Inactive Bulk, as shown in this
example:
CDM-710 MODEM
Firmware Version: X.X.X
Bulk:
FW12437P
5–5
MN/CDM710.IOM
08/06/09
4.1.5
Revision 12