Comtech EF Data CDM-710 Installation And Operation Manual page 141

CDM-710/L Broadcast Satellite Modem
Front Panel Operation
(Config:) Intfc1 HSSI:  Rx  Data
Use the   arrow keys to select Datarate or Invert. Press ENTER.
(Config:) Intfc1 HSSI:  Rx  Data  Datarate
This read-only status message indicates the Data Rate of the Rx MPEG-2
transport stream. Press ENTER or CLEAR to return to the previous menu.
(Config:) Intfc1 HSSI:  Rx  Data  Invert
Use this feature to ensure compatibility with certain older equipment. Use the 
 arrow keys to select Normal or Inverted. Press ENTER.
(Config:) Intfc1 HSSI:  Rx  Buffer
Use the   arrow keys to select Size or Recenter. Press ENTER.
(Config:) Intfc1 HSSI:  Rx  Buffer  Size
The Rx Buffer Size range is from 5.0 to 32.0 mSec in 0.1 mSec increments. Use
the   arrow keys to select the digit to edit, and then the  arrow keys to
change that digit. Press ENTER.
Intfc1 Rx Data:
Datarate Invert
Intfc1 Data Rate:
Rx: 032.000000 Mbps
Intfc1 Rx Data Invert:
Normal Inverted
Intfc1 Rx Buffer:
Size Recenter
Intfc1 Rx Buffer Size:
10.0 mSec (0343,680 Bits)
7–35
MN/CDM710.IOM
Revision 12
(E)
(E)
(E)