Using Fast Demo Mode - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710/L Broadcast Satellite Modem
FAST Activation Procedure
• Press [ENTER] or [CLEAR] as directed. The modem will then reset to
its default configuration.

6.3 Using FAST Demo Mode

The FAST Demo Mode enables all FAST options for a limited time. When
enabled, Demo Mode allows access to ALL CDM-710/L FAST options for 45 days.
Older units running earlier firmware versions allow Demo Mode for 604800
seconds (7 full days). Demo Mode may be turned on and off an unlimited
number of times until the available time has expired.
Do these steps to enable or disable FAST Demo Mode:
1. From anywhere in the front panel menus, press [CLEAR] to return to the
top-level menu. Use the ◄ ► arrow keys to select SELECT: UTIL  FAST.
Press [ENTER].
2. Use the ◄ ► arrow keys to select Cnfg. Press [ENTER]:
3. Use the ◄ ► arrow keys to select Demo Mode. Press [ENTER].
4. Use the ◄ ► arrow keys to select Demo Mode as Off or On. Press
[ENTER].
Configured Successfully
(ENTER or CLEAR)
FAST: Cnfg View
MainBoard S/N: 0123456789
FAST Configuration:
Edit Code Demo Mode
FAST Demo Mode: Off
604800 seconds remain
6–6
MN/CDM710.IOM
Revision 12
On