CDM-710/L Broadcast Satellite Modem
Installation
3.2.2 Install the Optional Rack Slide Set
Figure 3-4. Install the Optional Rack Slide Set
You may install the optional FP/SL0006 Bearingless 26" Rack Slide Set into the
equipment rack cabinet and onto the sides of the modem as shown.
Do these steps to install the slide set (Figure 3-4):
1. Use the provided hardware to install one slide onto each side of the modem
chassis.
2. Use the provided hardware to install the slide rail components into each
interior side of the equipment rack cabinet.
3. Install the modem into the front of the equipment rack. Ensure that the
slides properly engage the cabinet-mounted slide rails.
4. Continue to slide the modem into the equipment rack to its final operating
position. Then, use four user-provided screws to secure the modem to the
equipment rack's right and left threaded front rails (through the front panel
slots).
3–7
MN/CDM710.IOM
Revision 12